Doors and Windows

• Entry doors should be solid core wood that is at least 1-3/4" thick, or metal.
• Doors should fit tightly. 1/8" clearance maximum.
• Doors with glass panels should have a break-resistant plastic panel or metal grill.
• Sliding doors need special locks or a wooden strip in the track to block the door from opening.
• Don't install door hinges outside where they can be easily unscrewed.
• Use a dead-bolt door lock with a strike plate attached by 3" screws.
• A rim mounted lock with bolt affords good protection. Attaches to door with long screws.
• Use police locks on rear and basement doors.
• Padlocks must be sturdily constructed. Hasp must be bolted, not screwed.
• Use special locks for double hung windows.
• Use metal grills on vulnerable windows.